Stone Shield Fire Barrier EN is a wire-reinforced, high-density fire-resistant curtain manufactured using our proprietary basalt stone fibres. Designed to inhibit the spread of fire and smoke through building cavities, it offers superior performance for both horizontal and vertical applications and meets the requirements of BS the latest EN 1364-1:2015
Fire Resistance:
Tested to BS EN 1364-1:2015 and BS EN 1634-1:2014+A1:2018.
Achieves up to EI 120 depending on installation.
Historically tested/conforms to the following standards:
BS476:part 4, 1970 non-combustibility of building materials
BS476: part 6,1989 Fire propagation of building materials
BS479: part 7,1987 surface spread of Flame
BS476: part22,1987 Fire tested for building materials in non load bearing elements of construction
Provides excellent acoustic absorption in cavity spaces.
| 1 | Typical wet felt ceiling tile in lay-in-grid system | 30db |
| 2 | As above + 50mm thick TC hung vertically from soffit leaving no gap and with a 150mm overlap on top of ceiling | 43 db |
| 3 | installed as 2 but fireshield faced with foil on one side | 45 db |
| 4 | 2 independently hung barriers with foil facing on both sides | 50 db |
Fixed mechanically with angle supports and clamping plates. Refer to installation guide for details on overlaps, joint treatments, and spacing.
Stone Shield Fire Barrier EN installed in roof cavity (rendered illustration)
Looking for trusted protection materials for your next project?
Get in touch with our team for advice, technical support and recommendations.
© 2025 Stone Shield Fire Protection. All Rights Reserved. Web Design by 
UA Media.
